login   |    register

Scale Modeling Sponsors

See Your Ad Here!

Science Fiction: Campaigns
Information and discussion of group builds and campaigns.
Hosted by Rowan Baylis
Official tread: Sci-Fi III
Pave-Hawk
_VISITCOMMUNITY
Western Australia, Australia
Joined: May 05, 2006
KitMaker: 605 posts
ModelGeek: 41 posts
Posted: Thursday, August 03, 2017 - 10:33 PM GMT+7
Tie Fighter done!



X-Wing Begins!





Little bit of an Astromech



SGTJKJ
#041
_VISITCOMMUNITY
Kobenhavn, Denmark
Joined: July 20, 2006
KitMaker: 9,339 posts
ModelGeek: 497 posts
Posted: Friday, August 04, 2017 - 09:12 AM GMT+7
Great Looking Tie fighter!
Pave-Hawk
_VISITCOMMUNITY
Western Australia, Australia
Joined: May 05, 2006
KitMaker: 605 posts
ModelGeek: 41 posts
Posted: Friday, August 11, 2017 - 02:07 PM GMT+7
X-Wing is now done too





Will try to get some decent photos of all three together to upload to the gallery.
SGTJKJ
#041
_VISITCOMMUNITY
Kobenhavn, Denmark
Joined: July 20, 2006
KitMaker: 9,339 posts
ModelGeek: 497 posts
Posted: Friday, August 11, 2017 - 07:18 PM GMT+7
Nice looking X-wing. These kits look very unique when finished.

Thanks for participating:)
Pave-Hawk
_VISITCOMMUNITY
Western Australia, Australia
Joined: May 05, 2006
KitMaker: 605 posts
ModelGeek: 41 posts
Posted: Friday, August 11, 2017 - 08:57 PM GMT+7
They kind of make me think of the old WW2 identification models, but a bit more detailed.
Klaus-Adler
Staff MemberCampaigns Administrator
MODELGEEK
_VISITCOMMUNITY
Scotland, United Kingdom
Joined: June 08, 2015
KitMaker: 466 posts
ModelGeek: 157 posts
Posted: Saturday, August 12, 2017 - 08:43 AM GMT+7
I'm a little late to the start to this party but here is my opening shots of the kit i plan to build which is the JPG Productions 1/6 Gonk Droid:



SGTJKJ
#041
_VISITCOMMUNITY
Kobenhavn, Denmark
Joined: July 20, 2006
KitMaker: 9,339 posts
ModelGeek: 497 posts
Posted: Saturday, August 12, 2017 - 07:09 PM GMT+7
Welcome onboard, David!
Klaus-Adler
Staff MemberCampaigns Administrator
MODELGEEK
_VISITCOMMUNITY
Scotland, United Kingdom
Joined: June 08, 2015
KitMaker: 466 posts
ModelGeek: 157 posts
Posted: Saturday, August 12, 2017 - 11:11 PM GMT+7
just a quick update, the main part of the body has now been assembled and i have used perfect plastic putty to fill the gaps around the edges... this stuff is fantastic btw and i would recommend it to everyone as it's water based so it's easy to thin it or wipe away any excess with a wet cotton bud

SGTJKJ
#041
_VISITCOMMUNITY
Kobenhavn, Denmark
Joined: July 20, 2006
KitMaker: 9,339 posts
ModelGeek: 497 posts
Posted: Sunday, August 13, 2017 - 12:00 AM GMT+7
Water based plastic putty - what brand is that?
ClaytonFromEllijay
#454
_VISITCOMMUNITY
Georgia, United States
Joined: July 10, 2016
KitMaker: 1,243 posts
ModelGeek: 38 posts
Posted: Sunday, August 13, 2017 - 02:14 AM GMT+7
It's "Perfect" putty,by Deluxe, and I swear by it too, super stuff. https://www.deluxematerials.co.uk/en/scale-plastics/87-perfect-plastic-putty-5060243901095.html
ClaytonFromEllijay
#454
_VISITCOMMUNITY
Georgia, United States
Joined: July 10, 2016
KitMaker: 1,243 posts
ModelGeek: 38 posts
Posted: Sunday, August 13, 2017 - 02:17 AM GMT+7
Iain- how big are those models? Can you give a photo to show relation?
ClaytonFromEllijay
#454
_VISITCOMMUNITY
Georgia, United States
Joined: July 10, 2016
KitMaker: 1,243 posts
ModelGeek: 38 posts
Posted: Sunday, August 13, 2017 - 02:18 AM GMT+7
And David, I have to ask what a Gonk is....looks like a pet travel case...
Klaus-Adler
Staff MemberCampaigns Administrator
MODELGEEK
_VISITCOMMUNITY
Scotland, United Kingdom
Joined: June 08, 2015
KitMaker: 466 posts
ModelGeek: 157 posts
Posted: Sunday, August 13, 2017 - 03:48 AM GMT+7

Quoted Text

And David, I have to ask what a Gonk is....looks like a pet travel case...



It's a power droids. A sort of mobile generator if you will
MLD
_VISITCOMMUNITY
Vermont, United States
Joined: July 21, 2002
KitMaker: 3,187 posts
ModelGeek: 738 posts
Posted: Sunday, August 13, 2017 - 06:01 AM GMT+7
Gonk!!

What a great Star Wars beverage consumption game.
Every time its on screen the one who spots it decides who consumes... good times...
ClaytonFromEllijay
#454
_VISITCOMMUNITY
Georgia, United States
Joined: July 10, 2016
KitMaker: 1,243 posts
ModelGeek: 38 posts
Posted: Sunday, August 13, 2017 - 11:55 AM GMT+7

Quoted Text

Gonk!!

What a great Star Wars beverage consumption game.
Every time its on screen the one who spots it decides who consumes... good times...



I guess I'm showing my age!!
Klaus-Adler
Staff MemberCampaigns Administrator
MODELGEEK
_VISITCOMMUNITY
Scotland, United Kingdom
Joined: June 08, 2015
KitMaker: 466 posts
ModelGeek: 157 posts
Posted: Sunday, August 13, 2017 - 11:48 PM GMT+7
I think that the gonk droids only appear in ANH on tatooine and in jabba's palace...it was getting turned up side down and having it's feet tortured
Scipio2010
#401
_VISITCOMMUNITY
Georgia, United States
Joined: December 08, 2013
KitMaker: 214 posts
ModelGeek: 24 posts
Posted: Monday, August 14, 2017 - 10:56 AM GMT+7
I will be building the 1/12 Bandai Shoretrooper from Rogue One. I built a Phase II Clone Trooper from Bandai not too long ago and found its joints to be problematic. I will be gluing the joints this time around and using putty to mask the areas where the joints would be. Anyone that's built one of these knows it ends up looking more like an action figure than anything.

I plan on adding the kama and as many of the provided pouches as I can. I plan on painting the trooper in some mottled camouflage representing an elite recon unit within the Imperial Army.



SGTJKJ
#041
_VISITCOMMUNITY
Kobenhavn, Denmark
Joined: July 20, 2006
KitMaker: 9,339 posts
ModelGeek: 497 posts
Posted: Wednesday, August 16, 2017 - 02:51 PM GMT+7
Shawn, I have the same kit in my stash. When I looked through the parts I got the same thoughts as you.
The joints needs to be fixed to look realistic. It seems like green stuff might fix it if applied when the joint is made.

Looking forward to see more
Bluestab
_VISITCOMMUNITY
South Carolina, United States
Joined: December 03, 2009
KitMaker: 2,043 posts
ModelGeek: 69 posts
Posted: Friday, August 18, 2017 - 05:55 PM GMT+7
Back with an update.

The base kit really doesn't have much in the way of weapons. This one just has the nebelwerfer looking weapon for its right hand. Other versions of this kit have rocket pods or large versions of laser rifles for them to carry. The latter always seems impractical but it's an anime based mech.
I had two armored radio boxes from a couple of old Dragon StuG kits. They fit perfect where I wanted to place them. So that's the housing. For the guns I had two options. The first was a pair of optional 75mm guns from an Academy Hetzer kit. The other option was a pair of optional guns from a couple of Heller R35 tanks. After some posing, I went with the Heller guns. The 75mm guns were too big. The Heller guns looked better.
I mixed the two kits' gun halves (tan & gray). I cut off the rear of the guns, behind the mantlet. I scratched some mounting bits. The squares with the X-ribbing came from the spares and will serve as access panels to the guns.

sci-fi-3_27

Assembled and mounted. The smaller guns shouldn't be broken as easily if the mech falls over. I originally thought these would be small caliber antitank weapon...better tech makes for better weapon efficiency. Smaller rounds mean more ammunition carrying capacity. Being a sci-fi subject, I might just go with a partical weapon and not worry about ammunition.

sci-fi-3_28

So now the arms. The right arm has the nebelwerfer looking thing. I figure missiles for this, even though the tubes are rifled. I'm debating adding a cannon to the center tube and ammunition magazine to the opening on the side. I probably won't use it, just because it sticks out so far. Plus, I have the dual waist guns.
The left arm I gave a laser assembly. Two pulse lasers flanking a larger laser in the middle. I figure the pulse lasers would fill the same role as a coax MG. For energy use, the smaller lasers could not be used at the same time as the center laser. I kept the barrels short. I figured if they were too long they'd interfere with or be damaged when trying to use the hand.
Both arms has some added detail added to the flat sections of the upper arm casings.

sci-fi-3_29

I decided to remove the foot spike things. I didn't see a real use for them. I didn't want them on there and risk them being mistaken as foot rockets or something.
The circular things on the feet line up where axles would be for themoving parts of the feet. I added some bits to the feet for added detail to represent the mount ends for these axles. Some are center wheel hubs from an Italeri LAV-25. I had to mix them just due to the number of them.

sci-fi-3_30

Basic assembly done and ready for paint. I decided to leave off the big scope lense assembly on the visor. And I'll decide against using the claw...I actually decided on that while I was masking off the joints for paint. I also left off the antenna array...opting for a more normal looking one to be mounted on the backpack looking thing. I also removed the laser barrels for paint.

sci-fi-3_31

Ready to paint. I wanted to keep the inner mechanical bits dark gray so I masked them off. I disassembled the limbs. I used plastic cling wrap, wrapping them around the inner parts. I then re-attached the armored casings. The only tape I had to use was around the knees to keep the plastic wrap from bucling when bent.
I shot the base coat as a primer coat. I went with a rattle-can of Rustoleum gray auto primer. The original plan was to go with a tan/green or tan/darker gray camo schemes. I kind of like the overall gray. I might go with a secondary color. I'm still debating that.

sci-fi-3_32

Paint dried...but still stinking. The inner bits are still masked off so articulation is a bit stiff. I did pose it with a 1/35 Tamiya T34 to show how big this thing is.

sci-fi-3_33

I'll give it a couple of days to fully dry and the smell to go away. I still have to make the pilot figure. And I'm thinking about adding a gun and/or a rocket pod to the backpack. I'd liek to re-furbish those Terminator figures I used last campaign for infantry. I'd like to do a diorama...either a street scene or a mech bay scene...but I don't want to get ahead myself again. And of course the background story.
Back with an update.

The base kit really doesn't have much in the way of weapons. This one just has the nebelwerfer looking weapon for its right hand. Other versions of this kit have rocket pods or large versions of laser rifles for them to carry. The latter always seems impractical but it's an anime based mech.
I had two armored radio boxes from a couple of old Dragon StuG kits. They fit perfect where I wanted to place them. So that's the housing. For the guns I had two options. The first was a pair of optional 75mm guns from an Academy Hetzer kit. The other option was a pair of optional guns from a couple of Heller R35 tanks. After some posing, I went with the Heller guns. The 75mm guns were too big. The Heller guns looked better.
I mixed the two kits' gun halves (tan & gray). I cut off the rear of the guns, behind the mantlet. I scratched some mounting bits. The squares with the X-ribbing came from the spares and will serve as access panels to the guns.

sci-fi-3_27

Assembled and mounted. The smaller guns shouldn't be broken as easily if the mech falls over. I originally thought these would be small caliber antitank weapon...better tech makes for better weapon efficiency. Smaller rounds mean more ammunition carrying capacity. Being a sci-fi subject, I might just go with a partical weapon and not worry about ammunition.

sci-fi-3_28

So now the arms. The right arm has the nebelwerfer looking thing. I figure missiles for this, even though the tubes are rifled. I'm debating adding a cannon to the center tube and ammunition magazine to the opening on the side. I probably won't use it, just because it sticks out so far. Plus, I have the dual waist guns.
The left arm I gave a laser assembly. Two pulse lasers flanking a larger laser in the middle. I figure the pulse lasers would fill the same role as a coax MG. For energy use, the smaller lasers could not be used at the same time as the center laser. I kept the barrels short. I figured if they were too long they'd interfere with or be damaged when trying to use the hand.
Both arms has some added detail added to the flat sections of the upper arm casings.

sci-fi-3_29

I decided to remove the foot spike things. I didn't see a real use for them. I didn't want them on there and risk them being mistaken as foot rockets or something.
The circular things on the feet line up where axles would be for themoving parts of the feet. I added some bits to the feet for added detail to represent the mount ends for these axles. Some are center wheel hubs from an Italeri LAV-25. I had to mix them just due to the number of them.

sci-fi-3_30

Basic assembly done and ready for paint. I decided to leave off the big scope lense assembly on the visor. And I'll decide against using the claw...I actually decided on that while I was masking off the joints for paint. I also left off the antenna array...opting for a more normal looking one to be mounted on the backpack looking thing. I also removed the laser barrels for paint.

sci-fi-3_31

Ready to paint. I wanted to keep the inner mechanical bits dark gray so I masked them off. I disassembled the limbs. I used plastic cling wrap, wrapping them around the inner parts. I then re-attached the armored casings. The only tape I had to use was around the knees to keep the plastic wrap from bucling when bent.
I shot the base coat as a primer coat. I went with a rattle-can of Rustoleum gray auto primer. The original plan was to go with a tan/green or tan/darker gray camo schemes. I kind of like the overall gray. I might go with a secondary color. I'm still debating that.

sci-fi-3_32

Paint dried...but still stinking. The inner bits are still masked off so articulation is a bit stiff. I did pose it with a 1/35 Tamiya T34 to show how big this thing is.

sci-fi-3_33

I'll give it a couple of days to fully dry and the smell to go away. I still have to make the pilot figure. And I'm thinking about adding a gun and/or a rocket pod to the backpack. I'd like to re-furbish those Terminator figures I used last campaign for infantry. I have to find 5 identical parts to make the heads like I want. I'd like to do a diorama...either a street scene or a mech bay scene...but I don't want to get ahead myself again. I have a neat idea for the former. And of course the background story.
Lakota
#123
_VISITCOMMUNITY
New Mexico, United States
Joined: November 17, 2008
KitMaker: 714 posts
ModelGeek: 31 posts
Posted: Saturday, August 19, 2017 - 05:14 AM GMT+7
@Alex-He is one bad-lookinig dude. Can't wait to see more.
Take care,
Don "Lakota"
ClaytonFromEllijay
#454
_VISITCOMMUNITY
Georgia, United States
Joined: July 10, 2016
KitMaker: 1,243 posts
ModelGeek: 38 posts
Posted: Saturday, August 19, 2017 - 05:32 AM GMT+7

Quoted Text

@Alex-He is one bad-lookinig dude. Can't wait to see more.
Take care,
Don "Lakota"



Yep, I don't like the odds of those Ruskies getting away from him....
SGTJKJ
#041
_VISITCOMMUNITY
Kobenhavn, Denmark
Joined: July 20, 2006
KitMaker: 9,339 posts
ModelGeek: 497 posts
Posted: Sunday, August 20, 2017 - 05:19 PM GMT+7
Alex, looks good. Quite the beast - poor soviet tankers
Spruslayer
_VISITCOMMUNITY
Indiana, United States
Joined: May 26, 2017
KitMaker: 17 posts
ModelGeek: 10 posts
Posted: Tuesday, August 22, 2017 - 02:50 AM GMT+7


More progress on the Haunebu
Had to make clearance for the stairrails to get it to close



The interior
SGTJKJ
#041
_VISITCOMMUNITY
Kobenhavn, Denmark
Joined: July 20, 2006
KitMaker: 9,339 posts
ModelGeek: 497 posts
Posted: Wednesday, August 23, 2017 - 04:11 PM GMT+7
Looks great, Mike. Nice details in the interior. Is there anyway to show it of after the build is finished? Will you whether it or leave it clean?

Looking forward to see more
Spruslayer
_VISITCOMMUNITY
Indiana, United States
Joined: May 26, 2017
KitMaker: 17 posts
ModelGeek: 10 posts
Posted: Thursday, August 24, 2017 - 12:30 AM GMT+7
I plan on not glueing the top turret so it can be removed
Also going to weather the outside but still in the learning curve on that