login   |    register

Built Review
HO scale
Modern Trash Cans
Trash Cans - Brown
  • move

by: Frederick Boucher [ JPTRR ]

Originally published on:
RailRoad Modeling

Trash Cans
Item: 8009
Scale: "Finescale" HO 1/87
Colors: Black, blue, "faded-brown", green, olive

96-Gallon Trash "Toters"
Hi-Tech Details keeps bringing out super accessories to detail our layouts. As part of their City Details series they have created these trash and recycle bins for the discriminating civic-minded model railroader! HTD tells us

    These things "decorate" just about every town and city in America! And, depending on the area you hail from, one day a week you'll see braces of them at the curbside in front of just about every house... So could any eighties-up layout be considered complete without them? We don't think so, which is why we created them, just for yours!

HTD packs six of these injection-molded goodies in a set. These six toters are built with 30 parts: bin, lid, wheels, and axle. All parts are crisply molded without flash, major seams, sink holes, nor ejection marks. The only problem I see are the hefty sprue attachments on the parts. You will need nippers or a sharp blade to cleanly separate the parts from the sprue.

The two sprues are packaged in a plastic baggie stapled to a label backing. Inside are color instructions for assembly. Hi-Tech Details' website is hi-tech too, and you can view an animated "HOW-TO" assembly movie at it!

How much detail can a trash can have? Well, more than I would have thought! Fake spokes like the prototype are molded on the the plastic wheels of the models. The axle is separate. And you can see through the hinge at the rear of the top.

All of this is molded into parts smaller than a penny, in finescale HO.

Five common colors are available in individual packs: black, blue, brown, green, and olive. HTD molds their brown bin in "faded brown". My community has maroon toters so maybe HTD can add these (or maybe industrious modelers can paint them). Many municipalities have their names embossed or molded into their prototype but, understandably, no such detail is included with these.

So you can view the five colors, I built one of each.

Assembly is very simple and straightforward. HTD writes to use MEK or liquid cement. MEK is a carcinogen and liquid cements can also be hard on you. I tried the 'non-toxic' liquid cement by Plastruct and it was useless on the styrene these models are made with.* So I used a CA, which worked perfectly.

I cut the pieces from the sprues with nippers. The hefty sprue attachments cut cleanly but left a discolored area on the can parts. Next, I carved away some slight seams from the cans, and cut off the locator pins for the lids. Then I attached the axles. The CA worked great for joining all of these parts.

Using a No. 11 hobby blade I gently reamed out the wheels. Paint them black. Each was placed spoke-side down on a flat surface. Then I lightly tipped an axle end with CA, and mated the axle into a wheel; the upper edge of the can holds the toter in position while the wheel sets. Then I flip it over and repeat the process. All five were complete in about 30 minutes.

I can find nothing to 'trash' these gems about. They are sharply made and impressively detailed little kits of a ubiquitous sight in the United States and elsewhere. The only problems I see are the hefty sprue attachments on the parts, and lack of a common color.

Hi-Tech Details have released scene details that are hard to 'refuse' on a post-1970s layout or diorama. I happily recommend these little litter models!

Hi-Tech Details
HTD offers dozens of parts and kits in 14 categories:

    1. HO Real Deal Rubber Air & Signal Hoses
    2. HO Diesel , Plastic & Rubber
    3. HO Passenger Cars, Plastic & Rubber
    4. HO Rolling Stock, Plastic & Rubber
    5. HO Diesel , Injection-Molded
    6. HO Rolling Stock, Injection-Molded
    7. HO Lineside Structures & Street Detail
    8. Paint & Adhesive
    9. Tools
    10. Sound & Lighting Equipment
    11. Special Direct Only Detail Parts, Molded Plastic
    12. HO Scale Structure Kits
    13. O Scale Detail Parts
    14. N Scale Detail Parts

Hi-Tech Details website is hi-tech, too! Many of their sets and kits feature click-to-access how-to features and instructions.

Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here on RailRoadModeling.
Highs: They are sharply made and impressively detailed little kits of a ubiquitous sight in the United States and elsewhere. Five parts build each unit.
Lows: Hefty sprue attachments on the parts.
Verdict: It is hard to 'refuse' these lowly trash can for a post-1970s layout or diorama.
Percentage Rating
  Scale: HO Scale
  Mfg. ID: 8009
  Suggested Retail: $5.95
  Related Link: 
  PUBLISHED: Aug 23, 2012

Our Thanks to Hi-Tech Details!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View This Item  |  View Vendor Homepage  |  More Reviews  

About Frederick Boucher (JPTRR)

I'm a professional pilot with a degree in art. My first model was an AMT semi dump truck. Then Monogram's Lunar Lander right after the lunar landing. Next, Revell's 1/32 Bf-109G...cried havoc and released the dogs of modeling! My interests--if built before 1900, or after 1955, then I proba...

Copyright 2021 text by Frederick Boucher [ JPTRR ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of ModelGeek. All rights reserved.


another nice little set
AUG 24, 2012 - 03:08 AM

What's Your Opinion?

Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move