login   |    register

Built Review
Fokker Dr. I Triplane
World War I Fokker DR-1 Triplane
  • move

by: Frederick Boucher [ JPTRR ]

Originally published on:

  • move

Fokker Dr. I Triplane
Kit No.: 105

Released in 1956 the FOKKER DR-I [sic] was the fifth model of Aurora's original six "Famous Fighters" 1/48 World War One aircraft.

In order, the 5 predecessors (Using Aurora inaccurate punctuation and spelling.) were the French Nieuport 11, Sopwith Camel, SE-5 [sic] Scout and German Albatross [sic] D-3. (Curiously, although the Sopwith Tripe was one of their final models, it was originally numbered 100.) In the early 1970s Aurora reworked many of the molds by adding fabric texture and removing raised insignia and data markings, issuing the models as the 700 kit series. The Dr.I was kit 750. The triplane was not one of the kits eventually issued by Aurora subsidiary K&B.

In the box
This review is of the 1956 original vividly decorated ‘long box’ model. Aurora changed their logo, box design and decoration many times. One version included a superimposed faux newspaper clipping of Manfred Freiherr von Richthofen. To the chagrin of retailers Aurora, like many model makers then and now, printed their suggested retail price (79₵!) on the box.

Inside are instructions, decals, and 33 parts injection molded in two colors, black and a peculiar metallic burgundy color. One oddity is a streamlined ‘air scoop’ shown to attach between the machine guns. (Later editions were molded with common red.) One piece is an identification button imprinted with “FOKKER DRI GERMANY.” The plastic is also peculiar in that, while it is not scratched or nicked, it produces a glassy ‘tink’ when parts strike each other! It is so smooth that it looks as if the factory coated it with a hard high gloss polished finish. It reminds me of the plastic used to make ‘glass’ bottles and drinkware.

None of the parts are attached to a sprue in my sample. I don’t know if Aurora boxed them on sprues. Molding is impressive for the era with no airframe flash (A wisp of flash on the seat, and moderate flash on several manifold induction pipes of the Oberursel UR-2 rotary engine.), minor mold seam lines limited to struts, and almost no sinks. Typical of the era, there are visible ejector circles. Most are on the underside of parts except for those on the top of the bottom and middle wings, and wing struts. The worst sink I found is a shallow dogbone shaped depression on the fuselage portion of the middle wing. Perhaps it is to mount the guns in?

Accuracy? Aurora was one of – if not the - first to make models to a standard size. This quarterscale model averages out to 1/50 scale. With a top wing span of 25½ feet their Dr.I is too wide by 23 inches. The middle wing is 22½ feet wide while the prototype’s was 20½. I measured the fuselage from cowl face to trailing edge of the rudder at 19 feet 9 inches, 10 inches too long.

The cowl is wrong as the lower cut out is too shallow. Part thickness is out of scale for struts yet impressively thin for trailing edges, the horizontal stabilizer and the rudder. Certainly not what I expected! Test fitting reveals good fit. A pass of sandpaper along the fuselage should allow your glue to seal the slight gaps. Where the cabanes and interstruts mate into wing surfaces would require filler.

As was the fashion of the era all insignia and data is molded onto the airframe. Removing it is a horrible exercise at best even on flat surfaces!

Not much! The Oberursel is a suggestion at best, lacking valve rockers, valve rocker shafts and pins, and tappet rods – all very prominent.

Each 7.92mm Spandau LMG 08/15 machine gun would be unrecognizable if you didn’t know what they were supposed to be.

The cockpit is token: floor, seat, stick, instrument panel. Fortunately the pilot blocks seeing any of it.

Surface detail includes some raised lines representing access hatches, control horns, and control wire ports. One thing Aurora did not include are the wooden skids fitted under the lower wing tips to prevent damage to the wobbly Fokker on the ground.

Aurora did included a pilot and mechanic. The mechanic is reasonably well detailed although the detail is soft. Aurora also included a small base of rough ground with chocks molded on.

Instructions, decals, paint guide
Aurora did a good job with the instructions, a labeled exploded view of the model and a detailed 24-step assembly sequence for the 33 parts! The only painting guidance is mention that the Red Baron’s triplane should be red except the wheels, guns, engine and propeller.

Decals include eight Balkenkreuz and the fuselage serial “FDRI.2009/17” with “DR” and “/17” smaller than the rest of the printing. Like the identical raised markings on the fuselage, this data is incorrectly produced, the correct form is “Fok.Dr.I 425/17" with werke number "w/n 2009.”

Another great trip down memory taxilane! Even today this kit is sought for building and collecting. Some collectors enjoy building the kit as they did in the 1960s - straight from the box. Those who wish to build it to current standards will find it ripe for detailing and in need of serious surface sanding. One could by several accurate modern kits for the price of one of these. No doubt you can make a respectable model with it, as evidenced by the many examples online. However, I would only buy and build one for nostalgia.

As such it will look striking in your display case. That ‘electric cardinal’ burgundy is beautiful!

Our Thanks to Old Model Kits! This item was provided by them for the purpose of having it reviewed on Aeroscale.

My thanks to Aeroscale's own Stephen Lawson [Jackflash] for the photos of the built model!

HISTORY OF THE FOKKER DR-1 TRIPLANE (Using Aurora punctuation and spelling.)
    When the FOKKER TRIPLANE was first introduced it was regarded with skepticism on three counts; the fact that it was a triplane as opposed to the standard biplane; its peculiar cantilever wing spar construction without the usual wire bracing; and its thick "anti-high" speed airfoil section. However, in September, 1917, the German ace, Baron von Richthoffen, who had been wounded several months before, returned to his squadron, Jagdstaffel II, bringing with him the first DR-1 to appear on the Western Front and on his first time out in the new plane shot down a British R.E. 8 for his 60th victory. The next day a Sopwith Pup fell under his guns and as a final stamp of approval, the Baron said that he liked the Tripe, the only time he openly expressed a liking for any particular type plane.

    The FOKKER DR-1 was an attempt of the master fighter designer, Anthony Fokker, to produce a ship that would be invincible in the five or ten minutes of dogfighting that determined the outcome of a W.W.I air battle. He theorized that it did not matter how long it took a plane to get to a fight or to get back home; what it could do in battle was the important thing, so that the DR-1 was small, light, highly maneuverable and with an intentionally short range. With a 110 h.p. Oberursel rotary engine the Tripe was credited with a top speed of only 115 mph, but its outstanding rate of climb, 16,500 ft. in 14 minutes, was one of its greatest assets. Its ability to literally turn on a dime and to maintain its extreme maneuverability at high altitudes made it a favorite with German pilots and a respected adversary of Allied airmen. The armament consisted of twin Spandau 8 mm machine guns synchronized to fire singly or together through the prop. The total production of 150 Fokker Triplanes accounted for approximately 320 Allied planes, with the "Red Baron" Richthoffen scoring the last 20 of his 80 victories in this type plane.

    The DR-1 was primarily an excellent defensive aircraft and its use as an offensive weapon was the mistake that cost the German Air Service the lives of several of their most out¬standing aces. On September 23rd, Lt. Werner Voss was shot down after he had put on what is considered the greatest Fokker DR-1 fight on record. Flying alone, he ran into three flights of British planes; Bristol fighters on top, S.E. 5's of the famous High Hat squadron in the middle and Camels on the bottom. Voss lunged into the middle flight which contained such noted British aces as McCudden, Maxwell, Bowman and Rhys-Davids and passed through without a hit. Doubling back, Voss made a head-on pass at the High Hats, who broke formation and went after him. For nearly ten minutes, Voss bounced around like a rubber ball, finally pulled off and put his Tripe through a series of stunts as though taunting his opponents for their inability to corner him. Then once again he attacked and went to his death with 48 victories to his credit, but it took the best of the British pilots to beat him. Werner Voss' confidence in his DR-1 is understandable; he had scored one victory a day for 21 consecutive days with it. Seven months after this tremendous feat, the German Air Service and the Tripe suffered their greatest defeat when on April 21st, von Richthoffen, breaking his own strict rules on fighting, broke formation to follow his latest victim almost to ground level and was caught under the guns of Capt. A. Roy Brown of the 209th Squadron, R. A. F. Shortly after the Red Baron's death, the DR-1 was put on the retired list; the famed FOKKER D-7 was coming up to replace it. Together with the Camel the DR-1 was considered the supreme "dogfighter" of W.W.I, in addition to proving what has become universally accepted in aviation design—the cantilever wing.

    - Aurora

Sources: Oberursel


Highs: Clean molding. Impressively molded. Vignette display base and groundcrewman.
Lows: Much of the detail is soft and simplified, ejector marks and some seam lines abound, and there are those unfortunate raised areas for the inaccurate decals. Only basic interior detail occupies the small cockpit, the machine guns are toy-like.
Verdict: I would only buy and build one for nostalgia. As such it will look striking in your display case. That ‘electric cardinal’ burgundy is beautiful!
Percentage Rating
  Scale: 1:48
  Mfg. ID: 105
  Suggested Retail: 79₵ (in 1956)
  Related Link: Old Model Kits Aurora Section
  PUBLISHED: Jul 17, 2013

Our Thanks to Old Model Kits!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View This Item  |  View Vendor Homepage  |  More Reviews  

About Frederick Boucher (JPTRR)

I'm a professional pilot with a degree in art. My first model was an AMT semi dump truck. Then Monogram's Lunar Lander right after the lunar landing. Next, Revell's 1/32 Bf-109G...cried havoc and released the dogs of modeling! My interests--if built before 1900, or after 1955, then I proba...

Copyright ©2021 text by Frederick Boucher [ JPTRR ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of ModelGeek. All rights reserved.


Nice trip down the memory trail; I especially recall the bright burgundy plastic (same colour as their Me109) and the silly little black Spandaus. Oh yes, and those Aurora Decals, they must have been half a mm thick!! Thanks for the memories. Cheers, Lance
JUL 17, 2013 - 02:29 PM
I recently picked up a Fokker D8 in Metalic green. I will build it unpainted the pastic is so beautiful. Oh, and I still have my Dr.I though missing a wheel from that by gone era before paint was invented. BTW !!!! this model seem to be based on Willian Nye drawings from Model Airplane News in the late 40s? to 60s, as the same discrepancies on the models are found in the drawings, which were by far the best on the subject, in the era the model masters were created (so don't laugh at them for their shapes) the drawings are still available call the editorial office I got several in the 70s, when I worked near them. Captn Tommy
JUL 18, 2013 - 12:37 AM
Fred, thanks for the excellent review. I'll take one trip down memory lane over 30 reviews of the latest Hasegawa Tiger Meet F-16, any day! Great contribution, Sir!
JUL 23, 2013 - 08:22 AM
Captn Tommy, Lance, Scott; thanks for the kind words. Three more Aurora's are pending: DH10 Halberstadt CL.II Sopwith Triplane
JUL 23, 2013 - 11:08 AM

What's Your Opinion?

Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move