In-Box Review
Captain Sanders
Captain Sanders Serpentian Navy
  • move

by: Peter Ong [ TRISAW ]


Andrea Miniatures of Madrid, Spain has produced a ď1/32 (70mm) Science Fiction Dark Nova Captain Sanders Serpentian NavyĒ resin and white metal kit representing a futuristic armored space marine armed with two rifles, one in each hand.

Most 1/32nd figures measure to fifty-four millimeters (54mm) tall. Captain Sanders does measure to 70mm tall when assembled so donít let the 1/32nd scale (70mm) fool you. I compared Captain Sanders with its torso and legs testfitted to one of my 1/32nd (54mm) figures and Captain Sanders definitely is larger than any 1/32nd scale figure.

Andrea also provided a black wooden plinth with a felt bottom which I will review below.
The color printed box looks impressive with its glossy finish and high-resolution photos. Since I have a few Dark Nova figures already, I am familiar with Andreaís quality of printing and packaging. The main parts themselves are nestled in a foldable foam cushion with a cardboard backing and then slipped into a foldable cardboard sleeve held with two heavy staples. Remove the staples to unfold the foam cushion and access the parts. Yes, the box appears much larger than the figure it holds, but thatís mainly for advertisement purposes.

The side of the box lists the Andrea Color paint bottles required for painting the figure to match the boxart and also advertises some of the available Andrea products such as paint sets, steel wool, glue, and brushes.


The Captain Sanders figure kit consists of twelve parts, a combination of resin and white metal.

Resin base
White metal base rubble
Left resin leg
Right resin leg
Right resin upper arm
Right white metal forearm with rifle
Left white metal arm with rifle
White metal head
Left white metal rocket jetpack
Right white metal rocket jetpack
Left white metal shoulder armor
Right white metal shoulder armor
Quality Control Coupon
Basic Painting Guide color foldout sheet


This amazingly detailed figure comes with no pour blocks, seam lines, flash, or resin errors; hardly any prep work is required. Casting appears flawless with raised details and smooth edges and angles that constitute the space marineís hardened body armor. The feet have rectangular pegs that fit into holes in the base. The foot pegsí fit is superb, even for the white metal baseís slot hole.

The bases themselves are well-detailed with small rocks and rubble for the resin base and bent rebar, small stones, and texture for the white metal base.

I test fitted all of the parts and found the fit overall to be excellent. The pins to square holes are carved well and the pieces fit securely and snugly so that there is hardly any play and the figure cannot be posed differently without extensive modifications. This well-engineered figure hardly requires any filing and sanding, just gluing.

The pose looks great, one foot on the rubble with one arm raised and holding a rifle. The strong toughness of the space marine gives the possibility of shooting each rifle with one hand. The figure comes with no ammo pouches, straps, or reloads although that shouldnít really matter considering that the rifles have no ammunition magazines attached to them.

The twenty-four step-by-step photos in the Basic Painting Guide color foldout sheet show how to file, sand, glue, prime, and paint a generic figure. Some of the photos generally cover base coating, highlighting, and applying shadows to the body and face in addition to airbrushing the base. Four panels on the back showcase Andrea products such as their paint sets, new paintbrushes and wooden bases, spray cans, books, and DVDs and Youtube videos (the two later I didnít even know existed). This little booklet should help both beginners to even expert figure painters.

The Quality Control Coupon states that if any part is broken or missing, please indicate and mail this coupon to the address of Andrea Europe in Madrid, Spain as printed on the coupon. I found this coupon another reassurance as to the top-level quality of Andrea products.


Andrea Miniaturesís 1/32nd Captain Sanders Serpentian Navy represents one of the finest hard body armored space marines on the market today, especially for 1/32nd scale. Captain Sanders possesses a few unique characteristics: one, he wears a helmet unlike many of the other Sci-Fi figures on market today; two, he holds two rifles; three he has twin jetpacks; and four, he looks proportional unlike some of the other Dark Nova figures that wear an armored suit larger than their heads.

Without the pour blocks to cut away, seams to sand, and gaps to fill, 70mm Captain Sanders stands as one of the most perfect figures to assemble, prime, and paint.

Andrea Miniatures Black Wooden Plinth PDN-02
Andrea also provided me with a black wooden plinth (PDN-02) for the 70mm Captain Sanders figure. This base came in a plastic bag with a paper sleeve stapled to it.
The smooth semi-matte black plinth retains an impeccable lacquer finish and a dark green felt bottom.
The plinth measures five centimeters tall by five-and-a-half centimeters wide with a curving bevel at the bottom of the base. I detected no chips, scratches, or flaws marring the tough hardwood; quality appears excellent. I laid the Captain Sandersís resin base on top and found that the base wasnít oversized for the plinth.

Special thanks go to Andrea Miniatures for the figure and plinth review samples.
Highs: No pour blocks or seams to cut and sand and practically flawless fit and casting quality. 70mm tall size remains unique for a 1/32nd figure that often measures to 54mm tall.
Lows: None.
  Scale: 1:32
  Mfg. ID: DN-07
  PUBLISHED: May 22, 2018

About Peter Ong (Trisaw)

I model modern topics, mainly post 1991 Gulf War onwards. My modeling interests include: * Science-fiction/ fantasy * 1/100 Gundam * 1/35 armor * Kitbashed projects * Special Forces * Resin or plastic modern figures * 1/24 Police, fire, medical, and Government vehicles * Rare, unique, ori...

Copyright ©2021 text by Peter Ong [ TRISAW ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of ModelGeek. All rights reserved.


Looks a lot like Master Chief. Jim
MAY 21, 2018 - 10:26 PM
Looks like a great figure, I wonder how it will work against Revells halo kits. Thanks for posting the review
MAY 22, 2018 - 11:11 PM

Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move