In-Box Review
Hydra Triebflugel
FW Triebflugel with boarding ladder
  • move

by: Darren Baker [ CMOT ]


MiniArt is offering something a little different here that I feel falls into the realms of movie appeal due to a set of Hydra decals being included in the box ‘Captain America’ figure not included. This aircraft design was in the works as the war came to an end, but it is my understanding that design and development had only reached the stage of wind tunnel tests. The purpose of the aircraft was to enable fighter aircraft to be used from heavily damaged areas without the need of an airfield and so to some extent stem the effectiveness of Allied bombing. With this having a Marvel side to it I figured the people on ModelGeek would like to take a look at this offering.


This offering from MiniArt is packaged in the usual cardboard tray and card lid. Inside there is a single plastic bag containing the parts for the model with the photo etch elements protected inside a card envelope which is a positive change by MiniArt. The decals are left a tad unprotected and so I have opted to keep them inside the instruction booklet.

This offering from MiniArt has a very low parts count, but that does not mean it is weak. I do not know what factual documentation remains covering this aircraft and for that matter what MiniArt was able to find on it, but from what I can see this model looks pleasing. The cockpit is nicely detailed in that the layout is conventional and I was very pleased to see the inclusion of photo etched seat harnesses. Around the cockpit is the fire power and I could only find mention of this on Wikipedia and so the following information is open to debate; it is stated that the armament was to consist of 2 × 30 mm MK-103 and 2 × 20 mm MG-151 so reasonable offensive firepower. MiniArt has provided access panels for the modeller who wants the weapons to be seen.

With the cockpit assembled you have a front and rear fuselage in two half sections. Panel line detail here is pleasing and will provide the modeller with a nice look to their model once completed. The general shape of this fuselage reminds me a lot of the V-2 rocket shape. The tail has four fins of a reasonable size again much like the V-2 that leads me to believe the V-2 had a big impact on the basic design of this aircraft.

At the rear of the fuselage there is a single wheel that in the event of takeoff two doors close around. At the ends of each of the four tail fins there is a coaster wheel that extends out from the fin in order to provide a more stable platform. On takeoff these wheels retract into the fins and two doors cover each of the wheels.

The wings or blades depending on your standpoint are again nicely detailed for the painting process to bring out. The aircraft was way ahead of its time as it was to be powered by a jet at the tip of each blade. Each of the wings/blades could be rotated and that aspect has been provided by MiniArt in this model release. The blades rotate around a collar and being powered at the ends means there is no need for anything to stop the fuselage spinning. This release is being sold by MiniArt as a FW Triebflugel with boarding ladder and I am very pleased at the level of detail MiniArt has managed to put into this aspect.

The boarding ladder for this model is a hollow tube construction similar to scaffold poles but mounted on wheels. A ladder is provided for adding to the structure.

MiniArt has proposed four potential finishes for this model and they are as follows:
Air Defence Division of the German Army Air Corps ‘Africa, Central Africa 1946
Air Defence Battery Arctic Expedition ‘Clausewitz’ Antarctica 1946
One of the first licensed Triebflugel for the Japanese Air Force. 244th Sentai, Pacific 1946
Unit Hydra 40th


This offering from MiniArt is a very pleasing offering for those who like the what if the war had gone further or ended differently, very much along the line of the ball tanks that MiniArt also released. The model has a pleasing cockpit designed into it and with a low parts count it will make for a large and quick build that will especially appeal to the younger modellers and the older modellers who wants something different. I am pleased to see the Hydra addition to the finishes as I think this could hold a lot of appeal with fans of the Marvel Franchise.
Darren Baker takes a look at the FW Triebflugel with boarding ladder release from MiniArt with the Hydra finishing option.
  Scale: 1:35
  Mfg. ID: 40005
  PUBLISHED: Apr 13, 2020

Our Thanks to MiniArt!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View Vendor Homepage  |  More Reviews  

About Darren Baker (CMOT)

I have been building model kits since the early 70’s starting with Airfix kits of mostly aircraft, then progressing to the point I am at now building predominantly armour kits from all countries and time periods. Living in the middle of Salisbury plain since the 70’s, I have had lots of opportunitie...

Copyright ©2021 text by Darren Baker [ CMOT ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of ModelGeek. All rights reserved.


Didn't Red Skull beat a hasty retreat in one of these (or very similar) in "Captain America - The First Avenger"? (Duhhh...hence the Hydra decals!)
MAY 17, 2020 - 05:06 AM
He did, right after their first fight. Interesting blend of "what if" with popular fiction. Thank you for the review, Darren.
MAY 17, 2020 - 11:46 AM could modify a 1/35 German officer figure, in greatcoat, and add a red painted resin skull, for Red Skull. Making a Captain America figure would be a lot more difficult!
MAY 19, 2020 - 02:36 AM

Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move